Regency Espresso

Category: Product ID: 2515

Description

Shipping Time: Ships in 10-20 business days
Style: Raised Square (5pc recessed drawer header)
Face Frame: 3/4 Solid Birch
Door Frame: 3/4 Solid Birch
Door Center: HDF with Birch Veneer (HDF is used to avoid cracking/warping)
Sides: 1/2″ A-Grade plywood with wood veneer
Top & Bottom (Wall): 1/2″ A-Grade plywood with wood veneer
Bottom (Base): 1/2″ A-Grade plywood with wood veneer
Back Panel: 1/2″ Picture Frame Recess Style
Shelves: 3/4 ” A-Grade plywood with wood veneer
Base Cabinet Shelf Depth: 1/2
Drawer Box: Solid Wood 3/5 sides, Drawer bottom 1/2 plywood, Drawer length 21, Dovetail construction, Natural finish.
Drawer Glides: Undermount, full extension with soft closing feature
Base Corner Supports: Plastic corner brackets
Overlay: Full with Butt doors
Hinges:
Concealed 6-way adjustable with Soft Closing Feature
Cabinet Interior: Matches door finish
Center Stile: No center stile on cabinetry 24″W to 36″W
Assembly Method: Steel Clip
Finish: Polyurethane Finish with Glaze (Except KT)
Toe Kick: 1/2″ Plywood (sides of the toe kicks will be unfinished)
Installation Rail: 1/2″ Plywood
Wall Cabinet Bottoms Finished (Exterior): Yes
CARB Compliant: Yes
Door Hinges: Hinged To The Right By Default. Please Use Drop Down Options For Each Cabinet To Change Hinging From Right To Left
Toe Kicks Included w/Base Cabinets: Yes
Sides Panels Finished: Yes
Installation/Design Note: The full-overlay door style leaves roughly a 1/4″ clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2″ is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets.

The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth.

Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4″) which is within normal industry standards*

Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Cabinet Terms

Shipping Time: Ships in 10-20 business days
Style: Raised Square (5pc recessed drawer header)
Face Frame: 3/4 Solid Birch
Door Frame: 3/4 Solid Birch
Door Center: HDF with Birch Veneer (HDF is used to avoid cracking/warping)
Sides: 1/2″ A-Grade plywood with wood veneer
Top & Bottom (Wall): 1/2″ A-Grade plywood with wood veneer
Bottom (Base): 1/2″ A-Grade plywood with wood veneer
Back Panel: 1/2″ Picture Frame Recess Style
Shelves: 3/4 ” A-Grade plywood with wood veneer
Base Cabinet Shelf Depth: 1/2
Drawer Box: Solid Wood 3/5 sides, Drawer bottom 1/2 plywood, Drawer length 21, Dovetail construction, Natural finish.
Drawer Glides: Undermount, full extension with soft closing feature
Base Corner Supports: Plastic corner brackets
Overlay: Full with Butt doors
Hinges:
Concealed 6-way adjustable with Soft Closing Feature
Cabinet Interior: Matches door finish
Center Stile: No center stile on cabinetry 24″W to 36″W
Assembly Method: Steel Clip
Finish: Polyurethane Finish with Glaze (Except KT)
Toe Kick: 1/2″ Plywood (sides of the toe kicks will be unfinished)
Installation Rail: 1/2″ Plywood
Wall Cabinet Bottoms Finished (Exterior): Yes
CARB Compliant: Yes
Door Hinges: Hinged To The Right By Default. Please Use Drop Down Options For Each Cabinet To Change Hinging From Right To Left
Toe Kicks Included w/Base Cabinets: Yes
Sides Panels Finished: Yes
Installation/Design Note: The full-overlay door style leaves roughly a 1/4″ clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2″ is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets.

The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth.

Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4″) which is within normal industry standards*

Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Cabinet Terms

Reviews

There are no reviews yet.

Be the first to review “Regency Espresso”

Your email address will not be published.